Product Center
Products
Explore radiative cooling, aerogel and waterproof technologies developed around real substrates, service conditions and engineering targets.
Three Product Systems
Product Categories
Explore radiative cooling, aerogel and waterproof material systems by application need before comparing the available formats in each category.
01
Radiative Cooling Products
Passive thermal-management films, coatings and fabrics engineered to reflect solar heat and release long-wave infrared energy.
Explore category →
02
Aerogel Products
Low-density silica aerogel powders, pastes and coatings for compact thermal insulation and functional material formulations.
Explore category →
03
Waterproof Products
Coatings and prefabricated membranes for roofs, concrete, wet areas, outdoor hard surfaces and demanding protective applications.
Explore category →Complete Catalog
Product Range
Browse Huacheng radiative cooling, aerogel and waterproof products with direct access to product specifications, application guidance and enquiry options.
-
Technical ProductAerogel Coating
Silica aerogel product: low thermal conductivity, low density, high porosity. Provides thermal insulation, sound absorption, adsorption, waterproofing. Used in construction, industry, batteries, electronics, textiles, plastics, and more.
View product → -
Technical ProductAerogel Paste
<p>Aerogel Paste: SiO₂ aerogel water-based paste, 0.018 W/(m·K) thermal conductivity, density 60 kg/m³. For construction, industrial insulation, new energy, electronics. Lightweight, eco-friendly, processable, up to 200°C.</p>
View product → -
Technical Product
Aerogel Powder
<p>Aerogel Powder QN-02-50: 0.017 W/(m·K) thermal conductivity, 50 μm particle size, >90% porosity, hydrophobic, lightweight. Used for building insulation, industrial thermal insulation, battery thermal management, electronics cooling, plus sound absorption and adsorption. Eco-friendly, non-toxic.</p>
View product → -
Technical Product
High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating
<p>CF-300 acrylic copolymer waterproof coating forms a seamless, flexible yet tough membrane. Available in six colors, eliminating topcoat. Water-based, solvent-free, VOC-compliant. Solid content >60%, service temp -15°C to 110°C. Ideal for durable, aesthetic waterproofing.</p>
View product → -
Technical ProductMoisture-Cure Single-Component PU Waterproof Coating — Ready-to-Use, No Primer Needed
One-component moisture-curing polyurethane waterproof coating. Ready-to-use, no mixing. Forms seamless elastic membrane with strong adhesion to concrete, wood, metal, ceramic. Solid content >85%, withstands heat aging, acid/alkali, weathering.
View product → -
Technical ProductPolymer-Modified Cementitious (JS) Waterproof Coating
Polymer-modified cementitious (JS) waterproof coating: water-based two-component, polymer-cement composite. Forms flexible, crack-bridging seamless membrane for concrete/masonry. Meets Type I standards, retains ≥80% tensile strength and ≥450% elongation after heat, acid, alkali, weathering.
View product → -
Technical ProductPolyurea Top Coating
HZ06 aspartic polyurea elastomeric coating with waterproofing, corrosion resistance, high strength, strong adhesion, flexibility, weather resistance, anti-yellowing, and long service life. Suitable for various substrates requiring durable protection.
View product → -
Technical Product
Radiative Cooling Coating
<p>Passive radiative cooling requires ≥94% solar reflectivity and high IR emissivity. Coating maintains surface temperature below ambient day and night via energy balance</p>
View product → -
Technical ProductRadiative Cooling Film
<p>Radiative cooling film reflects sunlight and radiates heat for passive, energy-free cooling. Applied to surfaces or substrates (steel, rolls) to lower building/equipment temperatures, saving energy and enhancing comfort.</p>
View product → -
Technical ProductRadiative Cooling Sunshading Fabric
<p>Outdoor shading fabrics (awnings/blinds) block solar heat, lower surface/perceived temperatures, and resist UV, water, and mold. High reflectivity and emissivity enable passive radiative cooling, reducing AC load and saving energy—all without electricity.</p>
View product → -
Technical ProductSBS-Modified Prefabricated Anti-Slip Roll Membrane
<p>Prefabricated SBS-modified bituminous anti-slip roll membrane for outdoor hard surfaces. Waterproof, abrasion-resistant, high-traction. Available in standard/custom colors. Rapid installation—no hot-melt equipment, immediate traffic resumption. Ideal for pathways, playgrounds, scenic routes.</p>
View product → -
Technical ProductTwo-Component PU Waterproof Coating
Two-component polyurethane waterproof coating (Type I), 1:1 mix ratio. Cures to elastic seamless film: tensile ≥2.0 MPa, elongation ≥500%, service from -35°C to 80°C. Cold-applied, zero coal tar, ideal for thick-film, demanding projects.
View product → -
Technical ProductWindow Insulation Film
<p>Window insulation film (PET-based with nano-ceramic/magnetron sputtering) reflects summer heat and retains winter warmth, reducing building energy loss. A cost-effective alternative to glass replacement, with Low-E and radiative cooling options for enhanced efficiency.</p>
View product →
Technical Overview
Different materials one application led process
Huacheng connects formulation, manufacturing, test verification and project guidance so material selection begins with the operating condition—not only the product name.
Define the condition
Identify substrate, exposure, temperature, moisture and installation constraints.
Match the material
Select the product family and format according to the required mechanism and construction route.
Verify and deliver
Confirm key data, samples, documentation and project-use guidance before supply.
Technical Documents
Documentation for selection and project delivery
Technical Data Sheet
Performance values and product specifications.
Safety Data Sheet
Handling, storage and safety information.
Test Reports
Available validation records for selected products.
Application Guide
Substrate, installation and project-use guidance.
Documents are supplied according to the selected product and project requirements. Contact the technical team for the current controlled version.
FAQ
Questions before product selection
Share the substrate, service environment and performance target for a more precise recommendation.
Can Huacheng recommend a product from project conditions?
Yes. Provide substrate, exposure, target performance, application method and required quantity for an initial technical recommendation.
Are samples available?
Sample availability depends on the product and destination. The technical and commercial teams will confirm format, lead time and transport requirements.
Can products be customized?
Selected products may support adjustments to dimensions, packaging, color or formulation targets after technical and order review.
Start a Technical Conversation
Match the right material system to your application
Send the substrate, operating environment, performance target and supply requirements. Huacheng will help define the next technical step.