Product Details
SBS-Modified Prefabricated Anti-Slip Roll Membrane
<p>Prefabricated SBS-modified bituminous anti-slip roll membrane for outdoor hard surfaces. Waterproof, abrasion-resistant, high-traction. Available in standard/custom colors. Rapid installation—no hot-melt equipment, immediate traffic resumption. Ideal for pathways, playgrounds, scenic routes.</p>
Category
Waterproof Products
Product Overview
Performance aligned with the real application
- Continuous water-ingress protection
- Strong substrate compatibility and adhesion options
- Flexible systems for movement and exposure
- Application guidance for preparation, coating and curing
Product Data
Technical Specifications
Review the available performance values, physical properties and product parameters for SBS-Modified Prefabricated Anti-Slip Roll Membrane. Confirm the current controlled data sheet before final specification.
Technical Parameters
| Item | Value |
|---|---|
| Brand | Ahonesty |
| Place of Origin | China |
| Material Base | SBS-Modified Petroleum Bitumen + Polyurethane |
| Thickness | ≥4 mm |
| Width × Length | 100 cm × 10 m (10 m² per roll) |
| Softening Point | ≥80°C |
| Low-Temperature Flexibility | No cracks at -10°C |
| Tensile Strength | ≥400 N/50 mm (both directions) |
| Water Impermeability | Impermeable at 0.2 MPa for 30 min |
| Surface Finish | High-gloss color coating, custom colors available |
| Installation | Rapid lay-down, no hot-melt, immediate traffic |
| Minimum Order Quantity | 100 rolls |
| Payment Terms | T/T, L/C, PayPal, Western Union |
Reference values should be confirmed against the current controlled technical data sheet before specification or installation.
Application Scenarios
Typical project-use directions
Exposed and concealed roofs
Concrete and masonry structures
Pools and wet-service areas
Pathways and public hard surfaces
Technical Documents
Request the documents required for evaluation
Controlled product manuals, technical data sheets, safety data sheets, test reports and application guidance are supplied according to product and project requirements.
FAQ
Before specification or sampling
What information is needed for product evaluation
Share the substrate, operating environment, target performance, application method and required quantity so the team can assess product fit.
Which technical documents can Huacheng provide
Available files may include a product manual, technical data sheet, safety data sheet, test report and application guidance, depending on the product and project stage.
Can Huacheng support application planning
Yes. The technical team can review project conditions, recommend an evaluation route and confirm the relevant installation or processing considerations.
Discuss Your Project
Evaluate SBS-Modified Prefabricated Anti-Slip Roll Membrane for your application
Share substrate, operating conditions, target performance and required quantity for technical and commercial feedback.
Related Products
Continue exploring Aerogel Materials
-
Technical ProductTwo-Component PU Waterproof Coating
Two-component polyurethane waterproof coating (Type I), 1:1 mix ratio. Cures to elastic seamless film: tensile ≥2.0 MPa, elongation ≥500%, service from -35°C to 80°C. Cold-applied, zero coal tar, ideal for thick-film, demanding projects.
View product ? -
Technical ProductPolymer-Modified Cementitious (JS) Waterproof Coating
Polymer-modified cementitious (JS) waterproof coating: water-based two-component, polymer-cement composite. Forms flexible, crack-bridging seamless membrane for concrete/masonry. Meets Type I standards, retains ≥80% tensile strength and ≥450% elongation after heat, acid, alkali, weathering.
View product ? -
Technical ProductMoisture-Cure Single-Component PU Waterproof Coating — Ready-to-Use, No Primer Needed
One-component moisture-curing polyurethane waterproof coating. Ready-to-use, no mixing. Forms seamless elastic membrane with strong adhesion to concrete, wood, metal, ceramic. Solid content >85%, withstands heat aging, acid/alkali, weathering.
View product ?
SBS-Modified Prefabricated Anti-Slip Roll Membrane
Prefabricated SBS-modified bituminous anti-slip roll membrane for outdoor hard surfaces. Waterproof, abrasion-resistant, high-traction. Available in standard/custom colors. Rapid installation—no hot-melt equipment, immediate traffic resumption. Ideal for pathways, playgrounds, scenic routes.
Product Overview
Performance aligned with the real application
- Continuous water-ingress protection
- Strong substrate compatibility and adhesion options
- Flexible systems for movement and exposure
- Application guidance for preparation, coating and curing
Product Data
Technical Specifications
Review the available performance values, physical properties and product parameters for SBS-Modified Prefabricated Anti-Slip Roll Membrane. Confirm the current controlled data sheet before final specification.
Technical Parameters
| Item | Value |
|---|---|
| Brand | Ahonesty |
| Place of Origin | China |
| Material Base | SBS-Modified Petroleum Bitumen + Polyurethane |
| Thickness | ≥4 mm |
| Width × Length | 100 cm × 10 m (10 m² per roll) |
| Softening Point | ≥80°C |
| Low-Temperature Flexibility | No cracks at -10°C |
| Tensile Strength | ≥400 N/50 mm (both directions) |
| Water Impermeability | Impermeable at 0.2 MPa for 30 min |
| Surface Finish | High-gloss color coating, custom colors available |
| Installation | Rapid lay-down, no hot-melt, immediate traffic |
| Minimum Order Quantity | 100 rolls |
| Payment Terms | T/T, L/C, PayPal, Western Union |
Reference values should be confirmed against the current controlled technical data sheet before specification or installation.
Application Scenarios
Typical project-use directions
Exposed and concealed roofs
Concrete and masonry structures
Pools and wet-service areas
Pathways and public hard surfaces
Be the first to review “SBS-Modified Prefabricated Anti-Slip Roll Membrane”
Reviews
There are no reviews yet.