Product Details
High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating
<p>CF-300 acrylic copolymer waterproof coating forms a seamless, flexible yet tough membrane. Available in six colors, eliminating topcoat. Water-based, solvent-free, VOC-compliant. Solid content >60%, service temp -15°C to 110°C. Ideal for durable, aesthetic waterproofing.</p>
Category
Waterproof Products
Product Overview
Performance aligned with the real application
- Continuous water-ingress protection
- Strong substrate compatibility and adhesion options
- Flexible systems for movement and exposure
- Application guidance for preparation, coating and curing
Product Data
Technical Specifications
Review the available performance values, physical properties and product parameters for High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating. Confirm the current controlled data sheet before final specification.
Product Information
| Item | Value |
|---|---|
| Brand | Ahonesty |
| Model | CF-300 |
| Type | Acrylic Copolymer |
| Solid Content | 60% |
| Temperature Range | -15°C to 110°C |
| Available Colors | 6 options (Pink, Blue, Yellow, Gray, White, Green) |
| VOC | Low / Water-Based |
| Origin | China |
Test Results
| No | Test Condition | Property | Requirement | Result |
|---|---|---|---|---|
| 1 | Storage | Temperature | -15°C | No freezing, flocculation, or emulsion breaking |
| 2 | Standard state | Solid content / % | ≥65 | ≥65 |
| 3 | Standard state | Surface drying time / h | ≤4 | <2 |
| 4 | Standard state | Hard drying time / h | ≤8 | <7 |
| 5 | Standard state | Tensile strength / MPa | ≥1.2 | 2 |
| 6 | Standard state | Elongation at break / % | ≥300 | 320 |
| 7 | Standard state | Tear strength / (N/mm) | ≥12 | 13 |
| 8 | Standard state | Low-temperature bending | No cracks at -15°C | Pass |
| 9 | Standard state | Water impermeability | 0.3 MPa, 2 h, impermeable | Impermeable |
| 10 | Water resistance (23°C, 336 h) | Appearance | No cracks, delamination, bubbles, or breakage on coating film | No cracks, delamination, bubbles, or breakage on coating film |
| 11 | Standard state | Heating shrinkage/expansion rate / % | -1.0 to +1.0 | 0.1 |
| 12 | Bond strength | Standard state | ≥1.0 | 1.2 |
| 12 | Bond strength | Damp substrate | ≥0.8 | 1 |
| 13 | Heat treatment (80°C, 336 h) | Tensile strength / MPa | ≥1.0 | 2.1 |
| 13 | Heat treatment (80°C, 336 h) | Elongation at break / % | ≥200 | 310 |
| 13 | Heat treatment (80°C, 336 h) | Low-temperature bending | No cracks at -13°C | No cracks |
| 14 | Alkali treatment (0.1% NaOH + saturated Ca(OH)₂ solution, 168 h) | Tensile strength / MPa | ≥0.7 | 1 |
| 14 | Alkali treatment (0.1% NaOH + saturated Ca(OH)₂ solution, 168 h) | Elongation at break / % | ≥200 | 301 |
| 14 | Alkali treatment (0.1% NaOH + saturated Ca(OH)₂ solution, 168 h) | Low-temperature bending | No cracks at -10°C | No cracks |
| 15 | Acid treatment (2% H₂SO₄ solution, 168 h) | Tensile strength / MPa | ≥0.6 | 0.8 |
| 15 | Acid treatment (2% H₂SO₄ solution, 168 h) | Elongation at break / % | ≥200 | 285 |
| 15 | Acid treatment (2% H₂SO₄ solution, 168 h) | Low-temperature bending | No cracks at -10°C | No cracks |
Reference values should be confirmed against the current controlled technical data sheet before specification or installation.
Application Scenarios
Typical project-use directions
Exposed and concealed roofs
Concrete and masonry structures
Pools and wet-service areas
Pathways and public hard surfaces
Technical Documents
Request the documents required for evaluation
Controlled product manuals, technical data sheets, safety data sheets, test reports and application guidance are supplied according to product and project requirements.
FAQ
Before specification or sampling
What information is needed for product evaluation
Share the substrate, operating environment, target performance, application method and required quantity so the team can assess product fit.
Which technical documents can Huacheng provide
Available files may include a product manual, technical data sheet, safety data sheet, test report and application guidance, depending on the product and project stage.
Can Huacheng support application planning
Yes. The technical team can review project conditions, recommend an evaluation route and confirm the relevant installation or processing considerations.
Discuss Your Project
Evaluate High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating for your application
Share substrate, operating conditions, target performance and required quantity for technical and commercial feedback.
Related Products
Continue exploring Aerogel Materials
-
Technical ProductSBS-Modified Prefabricated Anti-Slip Roll Membrane
<p>Prefabricated SBS-modified bituminous anti-slip roll membrane for outdoor hard surfaces. Waterproof, abrasion-resistant, high-traction. Available in standard/custom colors. Rapid installation—no hot-melt equipment, immediate traffic resumption. Ideal for pathways, playgrounds, scenic routes.</p>
View product ? -
Technical ProductTwo-Component PU Waterproof Coating
Two-component polyurethane waterproof coating (Type I), 1:1 mix ratio. Cures to elastic seamless film: tensile ≥2.0 MPa, elongation ≥500%, service from -35°C to 80°C. Cold-applied, zero coal tar, ideal for thick-film, demanding projects.
View product ? -
Technical ProductPolymer-Modified Cementitious (JS) Waterproof Coating
Polymer-modified cementitious (JS) waterproof coating: water-based two-component, polymer-cement composite. Forms flexible, crack-bridging seamless membrane for concrete/masonry. Meets Type I standards, retains ≥80% tensile strength and ≥450% elongation after heat, acid, alkali, weathering.
View product ?
High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating
CF-300 acrylic copolymer waterproof coating forms a seamless, flexible yet tough membrane. Available in six colors, eliminating topcoat. Water-based, solvent-free, VOC-compliant. Solid content >60%, service temp -15°C to 110°C. Ideal for durable, aesthetic waterproofing.
Product Overview
Performance aligned with the real application
- Continuous water-ingress protection
- Strong substrate compatibility and adhesion options
- Flexible systems for movement and exposure
- Application guidance for preparation, coating and curing
Product Data
Technical Specifications
Review the available performance values, physical properties and product parameters for High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating. Confirm the current controlled data sheet before final specification.
Product Information
| Item | Value |
|---|---|
| Brand | Ahonesty |
| Model | CF-300 |
| Type | Acrylic Copolymer |
| Solid Content | 60% |
| Temperature Range | -15°C to 110°C |
| Available Colors | 6 options (Pink, Blue, Yellow, Gray, White, Green) |
| VOC | Low / Water-Based |
| Origin | China |
Test Results
| No | Test Condition | Property | Requirement | Result |
|---|---|---|---|---|
| 1 | Storage | Temperature | -15°C | No freezing, flocculation, or emulsion breaking |
| 2 | Standard state | Solid content / % | ≥65 | ≥65 |
| 3 | Standard state | Surface drying time / h | ≤4 | <2 |
| 4 | Standard state | Hard drying time / h | ≤8 | <7 |
| 5 | Standard state | Tensile strength / MPa | ≥1.2 | 2 |
| 6 | Standard state | Elongation at break / % | ≥300 | 320 |
| 7 | Standard state | Tear strength / (N/mm) | ≥12 | 13 |
| 8 | Standard state | Low-temperature bending | No cracks at -15°C | Pass |
| 9 | Standard state | Water impermeability | 0.3 MPa, 2 h, impermeable | Impermeable |
| 10 | Water resistance (23°C, 336 h) | Appearance | No cracks, delamination, bubbles, or breakage on coating film | No cracks, delamination, bubbles, or breakage on coating film |
| 11 | Standard state | Heating shrinkage/expansion rate / % | -1.0 to +1.0 | 0.1 |
| 12 | Bond strength | Standard state | ≥1.0 | 1.2 |
| 12 | Bond strength | Damp substrate | ≥0.8 | 1 |
| 13 | Heat treatment (80°C, 336 h) | Tensile strength / MPa | ≥1.0 | 2.1 |
| 13 | Heat treatment (80°C, 336 h) | Elongation at break / % | ≥200 | 310 |
| 13 | Heat treatment (80°C, 336 h) | Low-temperature bending | No cracks at -13°C | No cracks |
| 14 | Alkali treatment (0.1% NaOH + saturated Ca(OH)₂ solution, 168 h) | Tensile strength / MPa | ≥0.7 | 1 |
| 14 | Alkali treatment (0.1% NaOH + saturated Ca(OH)₂ solution, 168 h) | Elongation at break / % | ≥200 | 301 |
| 14 | Alkali treatment (0.1% NaOH + saturated Ca(OH)₂ solution, 168 h) | Low-temperature bending | No cracks at -10°C | No cracks |
| 15 | Acid treatment (2% H₂SO₄ solution, 168 h) | Tensile strength / MPa | ≥0.6 | 0.8 |
| 15 | Acid treatment (2% H₂SO₄ solution, 168 h) | Elongation at break / % | ≥200 | 285 |
| 15 | Acid treatment (2% H₂SO₄ solution, 168 h) | Low-temperature bending | No cracks at -10°C | No cracks |
Reference values should be confirmed against the current controlled technical data sheet before specification or installation.
Application Scenarios
Typical project-use directions
Exposed and concealed roofs
Concrete and masonry structures
Pools and wet-service areas
Pathways and public hard surfaces
“High-Solid Acrylic CF-300 Decorative Exposed Roof Waterproof Coating” の口コミを投稿します
レビュー
レビューはまだありません。